Sewzy

How to backstitch on a sewing machine (and when not to)

How to backstitch on a sewing machine: lock your seams step by step, fix thread nests, and when to skip it for gathering, basting and topstitching.

5 min read. Updated November 20, 2026.

The boxed tote bag this Sewzy pattern makes

Boxed Tote Bag pattern

To backstitch on a sewing machine, sew 3 to 4 stitches forward, press and hold the reverse lever or button to sew 3 to 4 stitches back over them, then release and sew forward along the seam. Do the same at the end of the seam. This locks the thread so the seam does not unravel.

Get the pattern: Boxed Tote Bag sewing pattern (free PDF), with every size and a step-by-step guide.

TL;DR

  • A backstitch (also called a backtack) is a few stitches sewn back over the start and end of a seam to lock it.
  • Sew 3 to 4 stitches forward, reverse over them, then sew on. Repeat at the end of the seam.
  • Hold both thread tails for the first stitches so the thread does not bunch into a nest.
  • Skip it on gathering stitches, basting and visible topstitching. Tie off the threads instead.
  • Many machines have a lock stitch button that does the job for you.

Sew the Boxed Tote Bag from this guide, step by step, in the Sewzy app

Pick your size, print it from your phone, and follow every step with a sewing coach beside you.

Download Sewzy on the App StoreQR code for the Sewzy app on the App Store

What is a backstitch on a sewing machine?

A backstitch is a short run of stitches sewn in reverse over the stitches you just made. It is also called a backtack or a lock stitch. The extra layer of thread holds the first and last stitches in place, so the seam does not pull out when you wear, wash or turn the project.

Do not confuse it with the hand backstitch. That is a different stitch, worked with a needle, where each stitch goes back to meet the last one to make a strong line. The machine version is only a few stitches at the ends of a seam.

Why do I need to backstitch?

A machine seam is just one line of thread looped through the fabric. Without a lock, a tug on the end can start to pull the line open. Backstitching the ends prevents that. It matters most where a seam gets stress or will not be crossed by another seam: the ends of a turning gap, the ends of an elastic casing, bag handles, pocket corners and the bottom of a zipper.

How do I backstitch step by step?

  1. Position the fabric. Put the needle down on the seam line at the raw edge and lower the presser foot.
  2. Hold the thread tails. Pull the top and bobbin threads gently back behind the foot and hold them for the first 2 or 3 stitches. This stops a thread nest.
  3. Sew forward. Sew 3 to 4 stitches along the seam line.
  4. Reverse. Press and hold the reverse lever or button and sew back over those stitches to the raw edge. Keep the stitches on the same line.
  5. Sew the seam. Release the lever and sew forward over the reverse stitches and along the whole seam.
  6. Lock the end. At the end of the seam, hold the reverse lever and sew back 3 to 4 stitches over the seam. Release it and sew forward to the edge again.
  7. Finish. Lift the foot and snip the threads.

At a normal stitch length, 3 to 4 stitches make a backtack of about ⅜ in. That is long enough to lock the thread and short enough to disappear into the seam allowance.

When should I skip the backstitch?

SituationDo this instead
Gathering stitchesLeave long tails so you can pull the thread. See how to gather fabric.
BastingNo lock needed. You will take the stitches out later.
Visible topstitchingPull the top thread to the wrong side and tie a knot. See how to topstitch.
Dart tipSew off the point and tie the tails. Backstitching makes a bump.
A seam another seam will crossThe next seam locks it. A lock is not needed.

A dart is a small tapered seam, so the tip is where a backstitch can show on the right side. Learn the neat method in how to sew darts.

What if my machine has a lock stitch button?

Many machines have a lock stitch or auto tie-off button. Press it at the start and the machine sews several stitches in place, then continues forward. Press it again at the end. If your machine has no button, you can shorten the stitch length to near zero for 3 or 4 stitches, but reversing is simpler and works on every machine. Check your manual for the exact controls.

Which beginner patterns can I use to practice?

Each of these free patterns has seams that need locked ends:

  • The Drawstring Bag takes about 30 minutes and has a casing at the top.
  • The Zipper Pouch takes about 45 minutes and teaches zippers.
  • The Boxed Tote Bag takes about 90 minutes. Backstitch the handle ends where they carry weight.
  • The Bowl Cozy takes about 60 minutes and includes darts.

Read how to sew a tote bag with boxed corners for a full walk-through.

Common mistakes

  • Thread nest at the start. The needle pulls the thread tails down into a knot under the fabric. Hold both tails for the first stitches. If thread keeps bunching, read sewing machine thread bunching under fabric.
  • Thin fabric sucked into the needle plate. Starting right at the edge can pull thin fabric down into the hole. Hold the threads and keep the fabric flat, or start on a small scrap of fabric and sew onto your project.
  • Backstitching too far. A long backtack makes a thick ridge. Keep it to 3 or 4 stitches.
  • Going off the seam line. The reverse stitches should sit right on top of the forward ones. A wobble looks like a double line.
  • Forgetting the ends of a turning gap. Backstitch both sides of the opening, or it can rip when you turn the project.
  • Locking stretch seams hard. On knits, keep the reverse short so the seam does not pucker.

Where can I learn more machine basics?

Learn the next steps in how to sew a straight line and curves and how to thread a sewing machine. Browse the free sewing patterns to practice. Each pattern in the Sewzy app lists its sizes, fabric amounts and steps.

Printable Christmas gift tags for sewists

Sew it step by step in the Sewzy app

Every size, a guide for each step and a sewing coach when you are stuck.

Download Sewzy on the App StoreQR code for the Sewzy app on the App Store

Or get free Christmas gift tags 🎁 by email

Get our printable sewing gift tags + an embroidery design, and new free patterns every two weeks.

By signing up you join the Sewzy newsletter. Unsubscribe anytime. Privacy.

FAQ

How do you backstitch on a sewing machine?

Sew 3 to 4 stitches forward, hold the reverse lever or button to sew back over them, then release and sew along the seam. Repeat at the end of the seam.

How many stitches should I backstitch?

Three to four stitches is enough. A longer backtack makes a thick ridge in the seam allowance.

Do I always have to backstitch?

No. Skip it for gathering stitches, basting, dart tips and visible topstitching. Tie off the threads instead, or let the next seam lock the stitches.

What if my machine has no reverse button?

Most machines have one. If yours has a lock stitch button, use that. Otherwise set the stitch length near zero for 3 or 4 stitches, or tie the thread tails in a knot.

Is a machine backstitch the same as a hand backstitch?

No. The machine backstitch is a few reverse stitches that lock a seam end. The hand backstitch is a separate stitch used to sew a strong line by hand.

Background reading: Wikipedia: Backstitch

Patterns from this guide

More sewing guides

Pick a pattern tonight

Download Sewzy free and start with one of the free patterns.

Free to download

Free patternsFree
Every pattern, weekly$3.99
Every pattern, yearlyabout $0.58 a week$29.99

Premium starts with a 3-day free trial. Cancel any time in iOS Settings. Prices in USD.

Download Sewzy on the App Store