A memory bunny is a stuffed rabbit sewn from clothing that belonged to someone, such as a baby onesie, a flannel shirt or a blanket. The Memory Bunny pattern in the Sewzy app comes in 10 sizes from 6 to 24 inches, is rated intermediate, and lists about 240 minutes. What sets it apart from the other memory animals is the ears, a contrast inner ear, a small embroidered nose and a round puff tail.
TL;DR
- The Memory Bunny is in the Sewzy app. It is not one of the free patterns.
- 10 sizes, 6 to 24 inches finished height. A baby onesie makes the 6 or 8 inch bunny.
- Seam allowance is ¼ inch (6 mm) and it is already included in the pieces.
- Bunny details: two ears with a contrast inner ear, an embroidered perle cotton nose, a Y mouth and a gathered puff tail.
- For a baby, embroider the eyes and skip the pellets, safety eyes, buttons and joints. Pellets are only for a floppy bunny for an older child or adult.
Sew the Memory Bunny from this guide, step by step, in the Sewzy app
Pick your size, print it from your phone, and follow every step with a sewing coach beside you.

What is a memory bunny made from baby clothes?
It is a keepsake. You cut a worn baby sleeper or onesie open, turn it into flat panels and sew a small rabbit that keeps the exact fabric and colors. A newborn outfit that has been outgrown makes a good one. For the general method of choosing and preparing clothes, read how to make memory bears from clothing. This guide only covers what is different about the bunny. If you prefer another animal, see the memory cat pattern guide or the memory dog pattern guide.
How big is a memory bunny, and how much fabric does it need?
Sizes are the finished height. Here is what each size is made from, and the fabric amount.
| Finished height | Made from | Fabric |
|---|---|---|
| 6 inches | Baby onesie or sleeve | ⅛ yard |
| 8 inches | Baby onesie | ⅛ yard |
| 10 inches | Child tee | ¼ yard |
| 12 inches | Adult tee or shirt | ⅓ yard |
| 14 inches | Adult shirt | ½ yard |
| 16 inches | Adult shirt | ½ yard |
| 18 inches | Adult shirt or blouse | ⅔ yard |
| 20 inches | 2 shirts or a dress | ¾ yard |
| 22 inches | 2 shirts or a dress | 1 yard |
| 24 inches | Flannel or a blanket | 1¼ yards |
For a first bunny, a 12 inch size from one adult shirt is easy to handle. If you are working from baby clothes, the 6 and 8 inch sizes are the ones that fit a onesie. They are small, so the ears and limbs take patience.
What do I need besides fabric?
- Eyes: safety eyes (6 mm for the 6 to 10 inch sizes, 9 to 12 mm above), or embroidered eyes.
- Nose: perle cotton (pink or black, whichever suits your fabric), used for a small nose and a Y mouth.
- Inner ears: a scrap of cotton, a shirt cuff or a second garment.
- Stuffing: polyester fiberfill, plus optional poly pellets for a floppy bunny.
- Joints (optional): 4 plastic doll joints, or 4 shank buttons with strong thread.
- Tools: a doll needle and ladder-stitch thread.
- Interfacing: lightweight woven interfacing for anything stretchy.
How do I sew a memory bunny, step by step?
The pattern has seven steps. Here they are in plain words.
- Prepare the garment. Wash and press it, then cut it open along the seams into flat panels. Fuse interfacing to knits and thin cottons so they do not stretch. Decide where a pocket, buttons or a logo will land. The tummy and the foot pads are popular spots.
- Cut. Print only your size. Cut 2 head sides (mirrored), 1 head gusset, 2 body fronts, 2 body backs, 4 arms, 4 legs, 2 foot pads, 4 ears (2 outer and 2 inner) and 1 tail. Copy every notch, joint dot, eye mark and opening line.
- Head. Put the head sides right sides together and stitch the chin seam from the nose tip down to the neck. Then sew the short snout seam from the nose tip up to the bridge notch. Pin the gusset between the sides from the bridge notch over the crown to the nape and stitch both sides. Clip the curves and turn the head.
- Face and ears. Fit the safety eyes at the marks, or embroider them later. Stuff the head firmly, nose first. Gather the neck edge with a running thread, pull it tight and knot it. For each ear, sew one outer and one inner piece right sides together and turn it. Do not stuff it. Fold a pleat at the base so the inner ear faces forward and ladder-stitch each ear between its notches. Embroider a small nose and a Y mouth with perle cotton.
- Body. Stitch the body fronts together at the center front. Stitch the body backs at the center back, leaving the marked opening. Place the front on the back right sides together, stitch all round from neck to neck and turn through the opening.
- Arms and legs. Sew each pair, leaving the gap open. On the legs, sew the foot pad into the bottom between the notches before turning. Turn, stuff and close the gaps with ladder stitch, or leave the tops open if you use plastic doll joints.
- Join and finish. Stuff the body and close the opening. Ladder-stitch the head to the neck. Attach the limbs at the joint dots. For the tail, run a gathering thread round the edge of the circle, stuff a little, pull tight and ladder-stitch the puff to the back.
If hand closing is new to you, how to sew a ladder stitch shows the stitch.
How do I get the ears, nose and tail right?
Ears. The ear is turned but never stuffed, so it stays flat and soft. The inner ear faces forward, which is why a contrast fabric makes such a difference. Cut it from a shirt cuff or a floral scrap. Clip the curve at the tip before turning so it comes out smooth, and press it gently.
Nose and mouth. Use pink or black perle cotton for a small nose, then a Y mouth below it. Keep the stitches small. A big nose changes the whole face.
Tail. The tail is one circle with a gathering thread, a little stuffing and a pull-tight finish. It forms a round puff that you ladder-stitch to the back. Stuff it lightly so it stays round and soft.
Foot pads. Use a second garment or a cuff for contrast.
Can I make a floppy bunny, and is it safe for a baby?
Yes, the pattern lists optional poly pellets for a floppy bunny. Pellets are for an older child or adult. For a baby, the pattern says to embroider the eyes and skip the pellets. We also suggest skipping the safety eyes, plastic joints and shank buttons, ladder-stitching the limbs on instead, and leaving off any ribbon. Check the seams, because everything a baby can hold will go in the mouth.
Common mistakes
- Skipping interfacing on knits. Jersey stretches under the needle and the head turns out lopsided.
- Stuffing the ears. They are meant to stay flat.
- Cutting before planning. Decide where the pocket, logo or buttons will sit first.
- A heavy tail. Over-stuffing makes it a hard ball. Stuff a little.
- Skipping the clipping. Clip the head curves before turning, or the snout will pucker.
- Hard trims on a baby toy. Embroider the eyes, skip safety eyes, buttons, joints and pellets, and use ladder stitch.
How do I care for it, and what can I add?
The pattern says to spot clean, or hand wash cold if all the fabrics are washable, and air dry. Write the person's name and dates on twill tape and stitch it into the back seam. A 6 inch mini bunny from the offcuts makes a keychain. If you are making one as a Christmas gift for a baby, see baby's first Christmas gifts to sew.
More memory patterns
The same method works for the Memory Bear and the Memory Elephant. Browse them all in the memory animal patterns collection. New to stuffed toys? Start with how to sew a plushie.




Baby's first Christmas gifts to sew: 7 handmade ideas7 min read
How to understitch: keep facings and linings flat7 min read
Secret santa gifts to sew: 8 ideas in 10 to 60 minutes6 min read
How to sew stretch fabric on a regular machine6 min read